|
|
Start
|
Tuning
|
|
Mechanical tuning are these alterations of the engine, the driving,
fuel arrangement and underbodies of the vehicle, a thanks for which
improving technical parameters and mounted properties is being
achieved. Alterations of the driving and fuel arrangement are aimed at
receiving the greater power, the bigger driving moment but the thanks
ago reaching greater accelerations and the higher maximum speed. They
can it to be for example:
* change of the carburettor
* applying the
air filter about the lowered level of oppositions of the flow of air
*
change of phases of the timing gear
* applying high-energy spark plugs
* planning the head in order to increase the step of tensing
* using
the silencer about the lowered level of oppositions of the flow of the
exhaust fumes
* polishing and straightening pipes of the arrangement
out dolotowego and outlet
* installing the turbocharger
* change of the
gearbox (about different correlations and sometimes about the different
way of steering) and using the strengthened clutch is aimed at
Alterations of the underbody achieving the better adhesion and
stabilities of the vehicle.
| | This item includes 11 comments |
|
Read more...
|
|
Tuning
|
A similar target as a mechanical tuning have,
but because of the fact that he concerns changes of providing software
the electronic module of steering of the engine, perhaps to be
distinguished as the separate category. Thanks to substitutions it is
possible to change softwares:
* maximum speed
* maximum turnovers of
the engine
* charging up
* dose of fuel delivered to the engine
* angle
of the ignition
* Producers of internal-combustion engines will leave
the angle and the time of the injection certain reserve of the power
and the torque in serial providing software the engine driver. She
isn't aimed at providing with the safety of the driving individual in
cases of the very much strained work or very bad working conditions for
the engine. Safe increases for engines 5% of the
original power, for engines charged up of the 20% not to say the 50% of
the nominal power.
| | This item includes 7 comments |
|
Tuning
|
|
Optical tuning [edit] is aimed at a change of the appearance of the
vehicle, emphasizing its higher parameters as well as marking the owner
for the individual and raising the driving comfort. Some elements of
the mechanical tuning are elements of the optical tuning at the same
time (e.g. aluminium wheel rims) or straight out have no noticeable
influence on osiągi, becoming only an optical tuning (e.g. sports put
in place silencer factory). Comprehending the optical tuning
entertained one another amongst people, however it isn't until the end
correct. A tuning is only both exclusively tuning up and upgrading
sub-assemblies which have the task of setting the car or the motorbike
in motion i.e. reaching the higher speed, increasing the acceleration,
increasing the elasticity of engine. However installing isn't a tuning
of systems car-audio, increasing by installing components which have
the task attraction of the car and the like
| | This item includes 13 comments |
|
Tuning
|
|
Malicious expression to the very exaggerated
or grotesque optical tuning. Typical elements of the tuning "country"
these are stickers having in being going to emphasize technical
advantages of the vehicle, which in no way to have these advantages not
perhaps, attempts to make the vehicle resemble (of very popular class)
to, standing much higher vehicles of different brands.
| | This item includes 9 comments |
|
Tuning
|
Differently electronic tuning of the engine driver.
He is aimed at an improvement in parameters of the engine, through the
change of very providing software the driver of the engine. He relies
on the edition of the program controlling the work of engine driver.
Finding sie in the program crooked characteristics and maps, are being
modified under the angle of increasing the power and the moment of the
engine. With the help of the edition of the program it is possible to
change such values as np:
* max. speed
* max. turnovers of the engine
*
charging up * dose of fuel
* angle of the ignition
* moment of
embossing the beginning
* time of the injection
* and a lot of
different (practically everything what he is steering driver of the
engine) Producers of internal-combustion engines, will leave certain
reserve of the power and the torque in serial providing software the
engine driver. She is aimed at providing with the safety of the
individual of the driving, in cases very much strained work, or of very
bad working conditions for the engine. Safe increases for engines it ok 5% of the original power, for engines \"charged
up\" the 20% not to say the 50% of the nominal power.
| | This item includes 16 comments |
|
Tuning
|
|
Automotive body kits are usually constructed of either fiberglass or
polyurethane. Polyurethane is popular with car enthusiasts[citation
needed] because it is more resistant to damage and does not crack in
cold weather. In some cases body kits may also be constructed of carbon
fiber, which is a popular and lightweight material. However, carbon
fibre kits are not as highly regarded among speed enthusiasts, because
it is very costly for a minimal weight difference.
A bodykit or body kit is a collection of exterior modifications to a car, typically comprised of front and rear bumpers (fenders), side skirts, and spoilers.
Factory fitted body kits are now becoming more common, perhaps in
response to the growth of the aftermarket tuning industry in the late
nineties and onwards. Many manufacturers now work in-house with their
motorsport divisions to develop styling upgrades.
Body kits components are designed to complement each other and work together as a complete design. Despite this, the 'mix and match' approach is often seen on cars, where the front of one body kit will be matched with the rear of another. There are many companies that offer alternatives to the original appearance of the vehicle from the factory.
| | This item includes 345 comments |
|
Tuning
|
|
Word spoiler (from English spoil - to break) has two meanings in
Polish: - this way an element of the mechanization of the wing, applied
especially in big aeroplanes is being named. Tilt spoilers (of plates
having the form drawn aside on the upper surface area of the wing)
symmetrically on both wings causes the detachment (breaking) opływu and
therefore reducing the attack of the carrying capacity by the given
angle what is resulting in increasing the steepness of walking the path
(of reducing the height) of aeroplane without the increase in the
speed, essential especially at coming in to land. Asymmetrical leaning
spoilers causes coming into existence of the tliting moment and a
national lottery can in some situations and some aeroplanes replace or
aid action. - this way are determined all additional fairings,
odchylacze opływu, wings of the bodywork of the road vehicle,
aerodynamic, reducing the resistance properties being supposed to
improve it, ustateczniające or increasing the pressure of wheels on the
roadway, but also being only elements often of style of the bodywork.
From a point of view of semantics however using here determining is
correct spoiler only with reference to elements causing the detachment on the back edge of a roof or in the vicinity what is breaking
opływ, he is stabilizing the place of tearing it away, he is reducing
power resulting from the underpressure in this area and he is
increasing the force of pressure of wheels into this way. Profiled,
placed under the appropriate angle of the attack and generating the
carrying capacity directed into the bottom pieces however moved away
from the bodywork (a typical example is F1 bolides) they should not be
called spoilers, these are wings. But semantics with semantics - and
the environmental tongue has its habits.
| | This item includes 37 comments |
|
Read more...
|
|
Tuning
|
|
A
bumper is an element of wheeled vehicles serving for tempering inducing
collision of the vehicle with the second vehicle or the obstacle.
Repair of slight fractures in bumpers of plastics can be made with the
help of hot air, get from repair stations hotair. The handmade station
has turbo engine blowing air which is being heated to the set
temperature through the immersion heater. The airflow is being
regulated with the help of appropriate nozzles.
| | This item includes 21 comments |
|
|
|
